Eaton Band Decal Green and Blue

Our CloudStick decals offer vibrant colors that won't fade over time, even when exposed to sunlight and harsh weather conditions.

The remarkable adhesive ensures that your UV DTF transfers stay put on laptops, water bottles, car decals and more.

$3 from your purchase of this product will be donated to the Eaton High Band!

Distinction & Disclaimer

CloudStick is extremely durable, color fast, chip & weather resistant stickers/decals, but they can still wear down or lose adhesion depending on the conditions & circumstances. For that reason, we can’t make any warranties or guarantees and should not be used for mission-critical applications or equipment.

CloudStick Application Instructions

1. Prep Your Surface and Pre-Squeegee your UV-DTF CloudStick

Prepping the Area - When necessary, clean the surface of your item before applying the decal using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.

Pre-Squeegee - Place the design face down with the white side facing up. Using the edge of a credit card, run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text.

2. Separating The Clear Carrier Sheet From The White Backing

To detach the clear carrier sheet from the white backing, make a small tear away from the design. Gently peel the clear carrier sheet, watching to ensure the whole design lifts off the white backing. Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, re-squeegee, and attempt to peel again from a different angle. All decals have been pre-squeegeed before delivery to you, which will help in this process.

3. Placing Your UV-DTF Decal Onto Your Item

First, identify the placement area on your item.

For smaller designs (4 inches & under), carefully place the design onto the placement area with two hands controlling the placement.

For larger designs (6 inches & larger), you may find it easier to place the sticker starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping. Tip: Leave a corner of the carrier sheet unpressed to the product for easy peeling.

4. Completing the Transfer Process

After placing the design, firmly squeegee it 2-4 times. Peel the transfer adhesive slowly, watching to ensure all elements stick. Again,use your EYES and not just your hands. If any part of the design is not adhering, lay the carrier sheet back down, re-squeegee and try peeling from a different angle.

5. Enjoy Your Design!